A referral service, not a radon contractor.(608) 938-8356Request a quote

Radon Mitigation in Madison and Dane County

Request a quoteCall (608) 938-8356Text us

Out above the roofFanVent pipeGaugeSuction pointSoil gas

Radon mitigation means lowering the radon level in a house that has tested high. In Dane County that is a common situation: in Wisconsin DHS's 1995-2016 test record, half or more of the tests in most of the county's ZIP codes came in at or above EPA's action level of 4.0 pCi/L [1].

When mitigation is called for

Wisconsin DHS's rule of thumb is the federal one: if your radon test results are above 4 pCi/L, hire a certified contractor [2]. Below that there is no threshold at which the state says to act, and no level is formally considered safe — EPA's guidance is to test every home regardless of area [3].

Nothing in Wisconsin requires you to fix a high reading. There is no state mandate for homeowners, no requirement tied to selling a house, and no local ordinance in Dane County that we could find [4, 5]. Mitigation here is entirely the owner's decision.

What the work actually is

The method DHS describes is sub-slab depressurization: a pipe is installed through the foundation floor and connected to a small fan that draws soil gas from beneath the slab and vents it above the roofline, before it can enter the house [2]. DHS calls the design simple, effective and energy-efficient [2].

Done properly it should bring the level below 2 pCi/L, which is DHS's stated expectation of the method [2]. That is a useful number to hold a quote to, because it is more demanding than simply getting under 4.

Two things DHS is firm about:

That second warning deserves weight. The system works by changing the air pressure under your house, and a badly designed one can draw more gas in or interfere with a furnace or water heater flue.

How the parts fit together is on how a radon system works. If the house has a crawl space rather than a full basement, see crawl space radon.

What it costs

DHS puts the average contractor cost at $1,000 to $2,000, varying with the size and design of the house and the methods needed [2]. Running a fan costs about $200 a year in northern climates, including heating the replacement air [5]. The detail, with national price ranges by system type, is on radon mitigation cost.

DHS also cites an EPA cost-benefit analysis from December 2025 putting the return at up to $15 per dollar invested in mitigating an existing home above the action level [2].

Picking someone to do it

This is the part that works differently in Wisconsin than in most neighbouring states. The state does not require radon contractors to be licensed or certified at all [6]. Certification is voluntary and national, through NRPP or NRSB, and DHS counts nearly 150 Wisconsin contractors who hold one [6]. DHS recommends contacting at least three companies for estimates [2].

Because there is no state list, verifying the company is on you. How to do it in a few minutes is on choosing a radon contractor.

Afterwards

Test again. Wisconsin requires no post-installation test, so it is worth writing into the contract rather than assuming it. EPA's consumer guide to radon reduction sets out what a mitigation contract should cover, including whether post-installation testing and a guaranteed reduction are included [7].

A system also needs to keep running. The fan is the part that fails, usually after five to ten years, and a dead fan is silent — see radon fan replacement.

Get quotes

Request a quote with your town, foundation type and test result, and we'll pass it to an independent contractor working in Dane County.

We're a referral service, not a contractor. Wisconsin doesn't license or certify radon contractors, so we pass your request to independent contractors without checking their credentials, a referral is not an endorsement, and they may pay us for referrals.

Sources

  1. Wisconsin DHS, Radon Map: over 100,000 Wisconsin indoor radon test results, 1995-2016, aggregated by ZIP code (DHS_GIS feature service, queried Nov 18, 2026). https://wi-dhs.maps.arcgis.com/apps/webappviewer/index.html?id=68f3a3e068854810b626d002ce47aff4
  2. Wisconsin DHS, Radon: Mitigation (fetched Nov 18, 2026). https://www.dhs.wisconsin.gov/radon/reduce-radon.htm
  3. U.S. EPA, EPA Map of Radon Zones, last updated Aug 17, 2026. https://www.epa.gov/radon/epa-map-radon-zones
  4. Wisconsin DHS, Radon Information for Wisconsin (page last revised Oct 21, 2026). https://www.dhs.wisconsin.gov/radon/index.htm
  5. Wisconsin DHS, Radon: Resistant Construction (page last revised Oct 22, 2026). https://www.dhs.wisconsin.gov/radon/radon-resistant-const.htm
  6. Wisconsin DHS, Radon: How to find a contractor (page last revised Oct 7, 2026). https://www.dhs.wisconsin.gov/radon/proficiency.htm
  7. U.S. EPA, Consumer's Guide to Radon Reduction, EPA 402/K-10/005 (2025 edition, PDF). https://www.epa.gov/sites/default/files/2016-12/documents/2016_consumers_guide_to_radon_reduction.pdf
CallText us